Poor accuracy

Problem

Issues with data quality, RMS values reported in POSPac may be high.

Check the base station antenna type and coordinates (frame + epoch).
Check the antenna type used.
Check the original lever-arms and orientations were not changed.
Check DMI/GAMS lever-arms (disable for test processing to check results).
Check start/stop time in relation to static logging and initialization method.
Make sure you are using the best possible processing mode (for example, Single Base).
Make sure the base station is within 20 km (for Single Base).
Use the proper Multipath setting.

At least 95% of the SNR for L1 should be within 40 - 50 dB. At least 5 satellites need to be available for ambiguity resolution.

POSPac MMS

None

September 2020