GNSS eBubble options
You can configure the sensitivity and responsiveness of the GNSS eBubble in the GNSS eBubble options screen. To view this screen you can:
- Tap
in the eBubble window. - Tap and hold the receiver icon in the status bar to view the Receiver settings screen and then tap eBubble.
If you have more than one tilt sensor connected, you can also tap the GNSS softkey from the eBubble options screen for a different sensor. Changing the eBubble settings for one sensor changes the eBubble settings for all connected tilt sensors.
You can configure the following settings:
| Option | Description |
|---|---|
|
eBubble sensitivity |
The bubble moves 2 mm for the specified sensitivity angle. To decrease sensitivity select a large angle. |
|
Tilt tolerance |
Defines the maximum radius that the receiver can tilt and be considered in tolerance. The allowable range is 0.001 m to 1.000 m. The tilt distance shown is calculated using the current antenna height. |
|
Tilt calibration status |
Current tilt sensor calibration status. To recalibrate the eBubble, tap Calib. |
|
Calibration expires in |
The date that the current calibration will expire. The eBubble must then be recalibrated. |
|
Calibration age limit |
Displays the time period between calibrations. At the end of the time period the software will prompt you to recalibrate the eBubble. To edit the default value tap the pop‑up arrow. |
|
eBubble response |
Controls the eBubble's responsiveness to movement. |
