Keypad shortcuts

Display the menu

Menu key (short press)

The menu appears with the Favorites screen open. Use the right or down arrow keys to select a Favorite item. To close Favorites press the left arrow key and then use the up or down arrow keys to select a different menu item.

Display Favorites

Display Return to

Display Instrument functions or GNSS functions screen

Menu key (long press)

The Instrument functions screen appears if the software is connected to a conventional instrument.

The GNSS functions screen appears if the software is connected to a GNSS receiver or is not connected to a receiver or instrument.

Display the target/prism selection screen

Ctrl + P

Show or hide the GNSS eBubble

Ctrl + L when connected to a GNSS receiver that supports the eBubble.

Display the fullscreen map

Ctrl + M

Display the Key in a note screen

Ctrl + N

To access the feature code library when keying in a note, press the Space key twice.

Navigate between open screens in the software

Ctrl + Tab to move between open screens (excluding the map) in one direction, or Ctrl + Shift + Tab to move open screens in reverse order.

Open screens are listed in the Return to list in the Favorites screen.

Tap or , or press the Tab key.

The plan and cross section views are available when staking an alignment or when surveying or reviewing a road or tunnel using the Roads or Tunnels app.

Display the Windows Start menu

Windows key

Display the Windows desktop

Windows key + D

Lock the device orientation

Windows key + O

Sort columns

Tap the column heading. Tap the column heading again to reverse the sort order.

Softkeys

Ctrl + 1, 2, 3, or 4.

Press the number that corresponds to the position of the softkey (1 through 4, left to right).

Move between fields or items in a list

Up arrow, down arrow, Tab, Back Tab

In the Measure codes form or the Edit Measure codes screen, press Tab to move between the different controls in the form. When the focus is on the code buttons, use the arrow keys to move to the next code button.

Open a dropdown list

Right arrow

Select items in dropdown lists

Press the first character of the list item.

If multiple items start with the same character, press the first character again to move through the list.

Select a check box or button

Space (short press)

Delete a job or project

Ctrl + Del

To select multiple items in the map or in Point manager

Press and hold Ctrl and then tap the items.

To select a range of items in Point manager

Press and hold Shift and then tap the items at the start and end of your selection.

Enable/disable a Favorite function or open the appropriate screen

Press the configured function key on the controller when viewing any screen in the software.

Alternatively, tap and press the numeric key on the controller keyboard corresponding to the button for the favorite (1–9, 0, - or .) to enable/disable the function or open the appropriate screen.

Select an item in the Instrument functions screen

Press the numeric key on the controller keyboard corresponding to the button for the favorite (1–9, 0, - or .) to enable/disable the function or open the appropriate screen.

If you have configured a function key on the controller as a shortcut to an instrument function, you can press the configured function key when viewing any screen in the software.

Select an item in the GNSS functions screen

Press the numeric key on the controller keyboard corresponding to the button for the favorite (1–9, 0, - or .) to enable/disable the function or open the appropriate screen.

If you have configured a function key on the controller as a shortcut to a GNSS function, you can press the configured function key when viewing any screen in the software.

Switch between a GNSS and a conventional survey

Tap in the status line area of the status bar.

Measure a check shot

Ctrl + K

Initiate a measurement from the Measure codes screen

Press the numeric key on the controller keyboard corresponding to the button for the code.

When the buttons are set to a 3 x 3 layout, keys 7, 8, 9, activate the top row of buttons, keys 4, 5, 6 activate the middle row of buttons, keys 1, 2, 3 activate the bottom row of buttons.

When the buttons are set to a 4 x 3 layout, keys 0, - and . activate the bottom row of buttons.

You cannot use alphanumeric key shortcuts if the Multi-code button is enabled.

Select a group of codes in the Measure codes screen

Press A to Z to move to group pages 1 to 26. Key A opens group 1, Key B opens group 2... and key Z opens group 26.

You cannot use alphanumeric key shortcuts if the Multi-code button is enabled.

Compute a distance between two points

Enter the point names in the distance field, separated by a hyphen. For example, to compute the distance between points 2 and 3, enter "2‑3".

This method works with most alphanumeric point names, but it does not support point names that already contain a hyphen.

Compute an azimuth from two points

Enter the point names in the Azimuth field, separated by a hyphen. For example, to compute the azimuth from point 2 to point 3, enter "2‑3".

This method works with most alphanumeric point names, but it does not support point names that already contain a hyphen.

Copy

Ctrl + C

Paste

Ctrl + V

Save a screen capture of the current screen

On a Windows device:

• Press Windows + Fn + 0 to save the image as a file in the Pictures\Screenshots folder.
• Press Fn + 0 to save the image to the clipboard.

On an Android device: Press Power + Volume Down to save the image as a file in the Pictures\Screenshots folder.