To export data from the job

  1. Tap and select Job.

  2. In the Jobs screen, select the job to import data to.
  3. Tap Export. The Export screen appears.

  4. In the File format field, select the type of file to create.

    By default, the File name field shows the name of the current job and the file extension is the file extension for the selected file type.

    When you select the LAS point cloud export option, only the SX10 or SX12 scan point clouds and regions that are currently displayed in the map are exported. To include or exclude some regions or point clouds, select or deselect scans or regions in the Scans tab of the Layer manager. The LAS point cloud export option is available only when the Trimble Access software LAS Export option is licensed to the controller. To purchase a license for the LAS Exportoption, contact your Trimble Distributor.

  5. If required, edit the file name.

    By default the file will be exported to the folder where the current job is stored.

  6. To export the file to a different folder, tap to browse to and select the folder:

    • If you create or select a folder in the current job folder, then for subsequent exports from any job the software will create or select a folder of that name in whatever the current job folder is at the time of export. For example, if you create a folder named "Exports" in the current job folder, then for subsequent exports the software will export to a folder named "Exports" in the current job folder at the time of export.

      To change this behavior, either select a folder outside the Trimble Access project folder structure, or select the current job folder to restore the software to the default location.

    • If you select a folder that is outside the Trimble Access project folder structure, such as a network drive or a USB drive, then the software will continue to export files to the same nominated folder until you select a different folder.

      For Android controllers, USB drives should be formatted to the FAT32 format.

      If the controller is an Android device, you may be prompted to give Trimble Access read and write permissions for the USB drive. When you tap Yes, the Android folder selection screen appears. Tap in that screen, browse to the USB drive and tap [SELECT] or [Use this folder]. The USB drive now appears in the Trimble Access Select folder screen. If the USB drive detected message does not appear, or if you have dismissed the message, tap the Select USB drive softkey once the USB device is connected. Note that it can take up to 30 seconds for the USB drive to be detected.

      If you are exporting to PDF, note that PDF files cannot be exported directly to a USB drive on an Android device. You will need to export the file to a different folder and then manually copy it to the USB drive.

    If you have previously selected an export folder but then want the software to return to the default export location, tap and select the folder where the current job is stored.

  7. If the file format you selected is:
    • Comma Delimited (*.CSV, *.TXT), select a field for each value. When you tap Accept, you will be able to select the points to export. See Selecting points. To reorder points you have selected from a list or from the map, tap the Name column in the Points to export list.

    • DXF, select the DXF file format and the item types to export.

      If a point has features and attributes assigned to it then all the attributes are added as attributes of the inserted point in the DXF file.

      When a feature library (*.fxl) created by the Trimble Business Center software's Feature Definition Manager is used, the layers and colors defined in the FXL are used in the DXF.

    • ESRI Shapefiles, set the Coordinates to Grid (northing/easting/elevation) or Lat/Long coordinates (local latitude/longitude/height).

    • Grid local coordinates, select whether to output the original entered grid (local) coordinates or the computed display grid (local) coordinates.

      The computed grid (local) coordinates are derived by taking the keyed‑in or computed grid coordinates and then applying the display transformation. You must set the required display transformation before you export the file. To do this in Review job, select a point, go to Options, set the Coordinate view to Grid (local) and then select a Transformation for grid (local) display.

    • Stakeout report, specify the acceptable stakeout tolerances in the Stakeout horizontal tolerance and the Stakeout vertical tolerance fields. Any stakeout delta greater than the defined tolerances appears in color in the generated report.

    • Surface inspection report, enter a Report description that will appear near the top of the report.

      The Surface inspection report is available only as a PDF file.

    • Survey report, select whether to generate a detailed report and the format for reporting GNSS deltas. Any screen captures and snapshots saved to the job are automatically included in the report.
    • Traverse report, specify the traverse deltas limit. Values that exceed this limit are highlighted in the generated report.
    • JobXML, select the appropriate version number.
    • Utility Survey DXF, configure the options for creating lines and generating text.
  8. To automatically view the file after you create it, select the View created file check box.
  9. If you selected the Comma Delimited (*.CSV, *.TXT) file format, the Select points screen appears. Choose the method for selecting the points and then select them. See Selecting points. To reorder points you have selected from a list or from the map, tap the Name column in the Points to export list.
  10. Tap Accept.