Stakeout navigation

When navigating to a point during stakeout, the information shown depends on whether you are performing a Conventional or GNSS survey, and the options you have configured in the Stakeout options screen. To configure these options, see Stakeout navigation display.

  1. Hold the display screen in front of you as you walk forwards in the direction that the arrow is pointing. The arrow points in the direction of the point that you intend to measure (the "target").

    The navigation deltas appear at the bottom of the screen, and indicate the distance to and direction of the target. To change the displayed deltas, tap Options.

  2. When you get to within 3 meters (10 feet) of the point, the arrow disappears, and the in/out and left/right directions appear, with the instrument as a reference point.

    If you are operating a robotic instrument remotely from the target:

    • the instrument automatically tracks the prism as it moves
    • the instrument continuously updates the graphical display
    • the graphical display is reversed and the arrows are shown from the target (prism) to the instrument

    The first display shows which way the instrument should be turned, the angle that the instrument should display and the distance from the last point staked to the point currently being staked.

  3. Turn the instrument (two outline arrows will appear when it is on line), and direct the person holding the pole on line.

    If you are using a servo instrument, and the Servo auto turn field in the survey style is set to HA & VA, or HA only the instrument automatically turns to the point. If you are working robotically, or when the Servo auto turn field in the survey style is set to Off, the instrument does not turn automatically.

  4. Stake the point.

  1. Hold the display screen in front of you as you walk toward the point that you intend to stake (the "target"). The navigation deltas appear at the bottom of the screen, and indicate the distance to and direction of the target. To change the displayed deltas, tap Options.

    If you are using IMU tilt compensation and the IMU is aligned:

    • The heading from the receiver is used to orient the large stakeout navigation arrow, even when you are standing still. You must be facing the LED panel of the receiver for these to be orientated correctly.

    • The deltas apply to the pole tip. You can tilt the pole as required as you navigate to the feature.

    If you are using GNSS only:

    • The large navigation arrow points in the direction of the point that you intend to measure (the "target"). You must be moving for the navigation arrow to show the correct direction.
    • The horizontal deltas apply to the antenna phase center (APC). You must keep the pole vertical as you navigate to the feature.

    To change the reference point used by the small orientation arrow, tap the North/Sun softkey. (In portrait mode, swipe right to left along the row of softkeys to view more softkeys.)

  2. When you get to within 10 feet (3 meters) of the point, the arrow disappears and a bull's‑eye target appears. When staking a point, line, arc, or alignment a grid appears as you near the target. The grid changes scale as you move closer to the target.

    Keep facing in the same direction and only move forwards, backwards, left or right. Do not change your orientation.

  3. Continue moving forwards until the cross, representing your current position, covers the bull's‑eye target, representing the point.

    If you are using IMU tilt compensation and the IMU is aligned, once the fully zoomed‑in screen appears you can stop moving yourself and simply move the pole tip to the target position, using the stakeout screen for guidance.

  4. Stake the point.