To view current position information

If the controller is connected to a GNSS receiver, tap the receiver icon in the status bar and select Position to view the current position of the receiver.

When using a controller with internal GPS, a connected GNSS receiver is always used in preference to the internal GPS.

If the antenna height is defined, the software calculates the position of the pole tip.

If a GNSS receiver with a built‑in tilt sensor is being used, the current tilt distance is shown.

The Position screen does not apply the tilt correction to positions, therefore the position displayed is the uncorrected position.

To store the current position, tap Store.

To view the position of the base antenna, tap Base.

Tap Options to find out if the position is shown as WGS‑84, local, grid, grid (local), ECEF (WGS‑84), station and offset, or USNG/MGRS. A projection and datum transformation must be defined to view grid coordinates.